KERN & SOHN AET 200-4NM - Manual (Page 161)

AET_/PET_/ILT_NM-BA-e-1410 161
32. SYSTEM INFORMATION
This menu contains data on balance specification and installed applications.
Most of parameters in this menu are for the information purpose only.
Parameter <Ambient conditions>, enables previewing present ambient
conditions in a balance: temperature, humidity, pressure (if a balance features
corresponding ambient conditions sensors).
On selecting parameter <Print settings> the balance sends all settings to a
printer.
33. COMMUNICATION PROTOCOL
General information
A. A character based communication protocol balance-terminal is designed for
establishing communication between a KERN balance and a peripheral
devices via RS 232 interface.
B. It consists of commands sent from a peripheral device to the balance and
responses from the balance..
C. Responses are sent from the balance on each receipt of a command as a
reaction for a specific command.
D. Commands forming the communication protocol enable obtaining data on
balance's status and influencing its operation, e.g.: request measurement
results from the balance, zero indication, etc.