KERN & SOHN AET 200-4NM - Manual (Page 114)

114 AET_/PET_/ILT_NM-BA-e-1410
24.6. Using option “SAMPLE SELECTION”
The option enables selecting a sample that is prepared for weighing, with no
need to weigh samples is a sequence as suggested by the software. The option is
available only after initiating a given process.
Means of operation:
While in differential weighing mode, on selecting a series, press procedure
selecting key, e.g. <Weighing A>.
Then press the following key:
which opens a list of samples for which
the selected procedure can be carried
out.
Select a sample to be weighed from
displayed list.
This option is particularly useful if a
series contains a large number of
samples, and the user should weigh a
sample that is at the end of a series.
24.7. Deleting a value
The option, in case of an error, enables deleting last weighing record added to
the database. It applies to all processes in the working mode. The software
enables deleting only the last carried out measurement.
On accidental saving a weighing record (sample or
tare), i.e. wrong sample or container, press the
following key:
The weighing record is automatically deleted, and the
software returns to the previous step of the procedure.
The process can be carried out only once. Any trial to
use the option for second time results in displaying a
message on incorrect operation, and deleting a record
is aborted.