Updating part mass in the database, Part counting procedure – KERN & SOHN AET 200-4NM User Manual
Page 58
58
AET_/PET_/ILT_NM-BA-e-1410
15.6. Updating part mass in the database
Determined mass of a single part can be assigned to a product in the
database of products. This option is applied while using ACAI (automatic
accuracy correction) function in order to determine part mass with high
accuracy.
Procedure:
a) Determine mass of a single part
b) Press <
Database> key
c) Press and hold finger on name of a product, which mass is updated,
d) Contextual menu is displayed,
e) Select option <Assign standard>, reference mass is saved in a product
record under entry <Mass>.
15.7. Part counting procedure
The first step in parts counting mode is obtaining data on mass of a single
part. Select one of available options:
−
Give mass value of a single part (see point 15.3) and place parts on
balance’s weighing pan, balance displays totalized parts.
−
Set mass of a single part from a given quantity of parts (see point
16.4.), the balance additionally shows pictogram of the ACAI function
<
> (if enabled). Place parts on balance’s weighing pan, the balance
displays totalized parts.
−
Acquire mass of a single part from database of products (see point
16.5.) by selecting a desired product record. Place parts on balance’s
weighing pan, the balance displays totalized parts.
Caution:
All additional elements (i.e. packaging) have to be tarred before starting the parts
counting process.