KERN & SOHN AET 200-4NM - Manual (Page 49)

AET_/PET_/ILT_NM-BA-e-1410 49
Parameters related to working modes
Each working mode has programmable parameters determining its
functioning. Procedure of determining these parameters:
1. Press grey coloured workspace area
2. Below menu is displayed:
o
<Settings> - additional options related to a mode
o
<Keys> - defining quick access keys
o
<Information> - selecting information displayed in the workspace
o
<Printouts> - selecting type and content of a printout
o
<Profile> - selecting a profile, which is active during balance’s
operation
3. Press corresponding menu item and select area for modification,
Description of basic parameters accessible in <Settings> tab is provided in
point 10.8 of this user manual “Additional parameters on weighing process”.
Other parameters specific to each of working modes are presented in working
modes description.
14.2. Quick access keys
Balance user can define up to 7 quick
access keys, which are displayed in the
bottom bar.
On assigning a function to a specific
key, a corresponding soft key appears,
and it is located in the bottom
navigation bar of the main window.
It is a so called quick access key, dedicated for most often used functions
and processes.