KERN & SOHN AET 200-4NM - Manual (Page 65)

AET_/PET_/ILT_NM-BA-e-1410 65
Caution:
If the Target Value is acquired from the Database of Products, then fields Target
Value and Tolerance contain data referring to selected product. The data can be
edited and modified.
17.2. Additional settings of dosing mode
The additional settings enable adjusting the working mode to use’s needs and
requirements. To access the setting follow below procedure:
Procedure:
1. Press grey coloured workspace,
2. The display indicates menu of: Settings, Keys, Information, Printout and
Profile,
3. Press <Settings> key,
4. The display indicates functions related to dosing process: Result control,
Tare mode, Automatic footer printout, Printout mode / Value release,
Printouts
Means of using the above functions are given in point 9.7 “Additional
parameters on weighing process”.