KERN & SOHN AET 200-4NM - Manual (Page 104)

104 AET_/PET_/ILT_NM-BA-e-1410
On selecting the differential weighing mode the display contains the
following quick access keys in the bottom bar:
1. Setup – access to balance’s
menu
2. Series
3. Sample
4. Weighing A
5. Weighing B
6. Weighing T+A
7. Delete value
24.1. Additional settings of differential weighing mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. Access to these settings is described below:
Procedure:
1. Press grey coloured workspace
2. The display indicates menu of: Settings, Keys, Information, Printout
and Profile,
3. Press <Settings> key,
4. The display indicates functions related to differential settings
Differential weighing is related to the following settings:
− Threshold: mass value, as the value of maximal sample mass, e.g. filter
− Ambient conditions: (software option, in which the user sets the
requirement for giving ambient temperature and humidity values before
the weighing process: <Weighing A, Weighing T+A, Tarring T>)
o
NO, giving data on ambient conditions disabled ;
o
ONLINE, data on ambient conditions acquired from the ambient
conditions module, that is cooperating with the balance;
o
VALUE, temperature and humidity value have to be inserted by
the user, who reads the ambient conditions values from another
device controlling the ambient conditions.
− Maximal number of weighing records: (declaring number of
repetitions for the final weighing process <B> – Max 5 repetitions, the
setting is valid for all measuring series)
− For the other settings, follow the operation guidelines given in point
10.8. “Additional parameters on weighing process”.
24.2. Differential weighing – quick access keys
Each of working modes features a set of default quick access keys which are
automatically displayed on mode activation. The set of keys can be modified