KERN & SOHN AET 200-4NM - Manual (Page 136)

136 AET_/PET_/ILT_NM-BA-e-1410
27.11. A report from SQC
Each completed product control is sent to a connected printer and saved in the
<SQC Reports > database. Each record (control) saved in the database
features its individual number assigned at the moment of control end.
Control number format:
y y / M M / d d / H H / m m / s s, where:
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
ss – second of control end.
The user can preview data contained in each of control records.
Procedure:
•
Enter submenu < Databases > in accordance with point 27. of this user
manual,
•
Enter database < SQC Reports > and press a needed record from a
completed control.
List of parameters defined for a control:
1. Batch number [Batch number of a controlled product]
2. Start date [Date of control start]
3. End date [Date of control end]
4. User [Name of operator carrying out a control]
5. Product [Name of controlled product]
6. Batch quantity [Number of controlled samples]
7. Average [Average value from completed measurements]
8. Standard deviation [Average standard deviation]
9. Min [Minimum value of completed measurements]
10. Max [Maximum value of completed measurements]
11. Number of T2- errors [Quantity of –T2 errors]
12. Number of T1- errors [Quantity of –T1 errors]
13. Number of T1+ errors [Quantity of +T1 errors]
14. Number of T2+ errors [Quantity of +T2 errors]
15. A chart from control processes