KERN & SOHN AET 200-4NM - Manual (Page 151)

AET_/PET_/ILT_NM-BA-e-1410 151
30. INPUTS / OUTPUTS
Application of inputs:
The set of inputs is used to control balance’s operation. Each of 4 inputs is
connectable to the following functions or keys:
o
Checkweighing thresholds
o
Right door
o
Target value
o
Parameters
o
Profile
o
Statistics
o
Adjustment/Calibration
o
Add to statistics
o
Zero
o
Product
o
Tare
o
Warehouse
o
Set tare
o
Client
o
Disable tare
o
Parts counting: give part mass
o
Restore tare
o
Parts counting: set mass of a single
part
o
Packaging
o
Percent setup: give reference mass
o
Print
o
Percent setup: set 100%
o
Header printout
o
Density of solid
o
Footer printout
o
Density of liquid
o
Universal variable 1 ÷ 5
o
Air density
o
Accept
o
Control mass comparator’s robot
o
Abort
o
Task
o
User
o
Reference standard
o
Left door
On changing the logic status of the input system, e.g. from [0] to [1] a function
that is assigned to the system is carried out. For instance:
o
Carrying out automatic adjustment process to check balance’s accuracy,
o
Displaying the value of set checkweighing thresholds, or
o
Restoring tare value to weigh net mass of measured load.
Procedure
- Press key and press: “ Inputs / Outputs” key.
- Enter submenu < Inputs / Outputs>, select and press < Inputs> key
- Enter editing mode of a selected input, which opens list of available
functions,
- Select a function from displayed list and return to weighing.