KERN & SOHN AET 200-4NM - Manual (Page 70)

70 AET_/PET_/ILT_NM-BA-e-1410
19. DENSITY
Working mode < Density > features three separate modules. The first
one is used to determine density of solids, the second is for the density of
liquids, and the third one determines density of air. The third module is
available in balances AET.
Carrying out the density procedures requires installing an optional density kit
(additional equipment) appropriate to a model of used balance.
Working mode activating procedure
•
while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select < Density> mode, the software automatically returns to the
main window and displays pictogram in the upper bar.
The grey coloured workspace contains the following data:
o
Procedure Solids
o
Weighing 1
o
Weighing 2
o
Standard liquid Water
o
Temperature 22 o C
o
Density of standard liquid 0.9978 g/cm 3
On selecting the density mode the display contains the following quick
access keys in the bottom bar:
1. Setup – access to balance’s menu
2. Print header – print of data declared in the header
3. Print footer – print of data declared in the footer
4. Database of products – selection of products from corresponding database
5. Density of solid
6. Density of liquid