Nor-Cal SDC15 Controller - Manual (Page 108)

■ DO Assignment setting with Smart Loader Package SLP-C35
When setting [DO Assignment] with the Smart Loader Package SLP-C35 , select
[Edit (E)] → [Input/Output port setup (O)] in that order from the menu. The
output bit function, output assign, polarity of output assign, and polarity of output
bit function can be easily set using visual images as shown below.
Handling Precautions
In addition to the selection through the menu, the Input port setup
window can also be opened using the following procedures:
Click the input/output port setup icon .
Right-click in the input bit function setting window.
Press the [Ctrl] and [P] keys at the same time.
5-58
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Select the output bit function. The image of
the ladder is changed according to the
selected output bit function.
Select whether or not the polarity is set for
assigns A to D. Select the latch of the output status.
Select four output
assigns A to D. Select whether or not the polarity of
the bit function is made.