Nor-Cal SDC15 Controller - Manual (Page 7)

The Role of This Manual
v
Four different manuals in total are available for the SDC15 Single Loop Controller (hereafter referred to as
"this unit")
. Read appropriate manuals according to your requirements. If you do not have your required manual,
contact Yamatake Corporation or its dealer.
Additionally, you can download necessary manuals from "http://www.yamatake.com".
The user level of this unit can be selected from three levels, "Simple configuration", "Standard configuration", and
"High function configuration".
The functions you can set up only with "Simple configuration" are described in SDC15 Single Loop Controller
User's Manual for Basic Operation (CP-SP-1147E). If more advanced application is needed, refer to this manual.
This manual is intended for personnel who have already read SDC15 Single Loop Controller User's Manual for
Basic Operation and/or operated Yamatake's Single Loop Controller to fully understand its basic operation.
User’s M anual
WARNING
WARNING
CAUTION
CAUTION
SDC15 Single Loop Controller User's Manual for Basic Operation
Manual No. CP-SP-1147E
This manual is optional (sold separately). The manual describes the
functions you can set up only with "Simple configuration". Personnel in
charge of design, manufacture, operation, and/or maintenance of a system
using this unit must thoroughly read this manual. This manual describes
the installation, wiring, major functions and settings, operating procedures,
troubleshooting, and detailed specifications.
SDC15 Single Loop Controller User's Manual for Installation
Manual No. CP-UM-5287E
This manual is supplied with the product. Personnel in charge of design
and/or manufacture of a system using this unit must thoroughly read this
manual. This manual describes the safety precautions, installation, wiring,
list of parameters, and primary specifications. For further information about
operation, refer to other manuals, Basic Operation and/or Installation &
Configuration.
SDC15 Single Loop Controller User's Manual for
Installation & Configuration
Manual No. CP-SP-1148E
This manual. This manual is optional (sold separately). The manual
describes the hardware and all functions of this unit. Personnel in charge
of design, manufacture, operation, and/or maintenance of a system using
this unit and those in charge of communication software of a system using
the communication functions of this unit must thoroughly read this manual.
This manual also describes the installation, wiring, connections for
communication, all functions and settings of this unit, operating procedures,
communication with host station, such as personal computer,
communication addresses, troubleshooting, and detailed specifications.
SLP-C35 Smart Loader Package for SDC15/25/26/35/36 Single Loop
Controller User's Manual
Manual No. CP-UM-5290E
This manual is supplied with the Smart Loader Package. The manual
describes the software used to make various settings for SDC15/25/26/35/
36 using a personal computer. Personnel in charge of design or setting of
a system using SDC15/25/26/35/36 must thoroughly read this manual. The
manual describes installation of the software into a personal computer,
operation of the personal computer, various functions, and setup
procedures.