Nor-Cal SDC15 Controller - Manual (Page 213)

13-5
● Other specifications
Degrees of protection: Front panel of the unit conforms to IP66/NEMA 4X.
(Individual panel mounting with attached gaskets)
Power consumption: AC power model, Max. 12VA (8VA at 100Vac and 12VA at 264Vac)
(When using the functions similar to those of Yamatake’s SDC10, the
power consumption is 6VA at 100Vac and 9VA at 264Vac.)
DC power model, Max. 7VA (24Vac), Max. 5W (24 to 48Vdc)
Altitude: 2000m or less
Insulation resistance: Between power supply terminal and secondary terminal, 500Vdc, 10M Ω
or more
Dielectric strength: AC power model, Between power supply terminal and secondary terminal,
1500Vac for 1 min.
DC power model, Between power supply terminal and secondary terminal,
500Vac for 1min.
Inrush current at
power ON:
AC power model, Max. 20A
DC power model, Max. 20A
Non-detected power
failure time:
Max.20ms (AC model)
No power failure allowed (DC model)
Mass: Panel mounting type Approx. 150g (including mounting bracket)
Socket mounting type Approx. 200g (including socket)
Terminal screw
tightening torque:
Panel mounting type 0.4 to 0.6N·m
Socket mounting type 0.78 to 0.98N·m or less
Applicable standards: CE; EN61010-1, EN61326
UL; File No. E96090
Over-voltage category: Category II (IEC60364-4-443, IEC60664-1)
Allowable pollution
degree:
Pollution degree 2
Decoration sheet
material/color:
Polyester film/Dark gray (DK546)
Case material/color: Reformed PPE/Light gray (DIC650)
■ Accessories and optional parts
Chapter 13. SPECIFICATIONS
Name Model No.
Mounting bracket (For C15T) 81446403-001 (Accessory)
Gasket 81409657-001 (Accessory)
Current transformer (Hole diameter: 5.8mm) QN206A
Current transformer (Hole diameter: 12mm) QN212A
Socket (For C15S) 81446391-001
Hard cover 81446442-001
Soft cover 81446443-001
Terminal cover 81446898-001
Smart Loader Package SLP-C35J50
L-shaped plug adaptor 81441057-001