Nor-Cal SDC15 Controller - Manual (Page 85)

5-35
■ Input assign
The assign of four inputs (A, B, C, D) used for the input bit function can be set.
• When the input bit function of the same internal contact No. is set for input bit
functions 1 to 4, the display and setting can be made.
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
Item (Setting display/bank) Display Contents Initial value User level
Internal Contact 1 Input
assign A
(Setup setting/DI
Assignment bank) 0: Normally opened. (OFF, 0)
1: Normally closed. (ON, 1)
2: DI1
3: DI2
4 to 9: Undefined.
10: Internal Event 1
11: Internal Event 2
12: Internal Event 3
13: Internal Event 4
14: Internal Event 5
15 to 17: Undefined.
18: Communication DI1
19: Communication DI2
20: Communication DI3
21: Communication DI4
22: MANUAL mode
23: READY mode
24: Undefined.
25: AT running
26: During SP ramp
27: Undefined.
28: Alarm occurs.
29: PV alarm occurs.
30: Undefined.
31: mode key pressing status
32: Event output 1 status
33: Control output 1 status 2 High function
0 Internal Contact 1 Input
assign B
(Setup setting/DI
Assignment bank)
0 Internal Contact 1 Input
assign C
(Setup setting/DI
Assignment bank)
0 Internal Contact 1 Input
assign D
(Setup setting/DI
Assignment bank)
3 Internal Contact 2 Input
assign A
(Setup setting/DI
Assignment bank)
0 Internal Contact 2 Input
assign B
(Setup setting/DI
Assignment bank)
0 Internal Contact 2 Input
assign C
(Setup setting/DI
Assignment bank)
0 Internal Contact 2 Input
assign D
(Setup setting/DI
Assignment bank)
4 Internal Contact 3 Input
assign A
(Setup setting/DI
Assignment bank)
0 Internal Contact 3 Input
assign B
(Setup setting/DI
Assignment bank)
0 Internal Contact 3 Input
assign C
(Setup setting/DI
Assignment bank)
0 Internal Contact 3 Input
assign D
(Setup setting/DI
Assignment bank)