Nor-Cal SDC15 Controller - Manual (Page 148)

6-14
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item Contents Initial
value User
level Remarks
Internal Event
Configuration 3 The digits are determined to 1st digit,
2nd digit, 3rd digit, and 4th digit from
the right end. 0000 2
4th digit: Undefined. 0
1st digit: Controller
alarm OR 0: None
1: Alarm direct + OR operation
2: Alarm direct + AND operation
3: Alarm reverse + OR operation
4: Alarm reverse + AND operation
2nd digit: Special OFF
setup 0: As usual.
1: When the event set value (main
setting) is “0”, the event is “OFF”.
3rd digit: Delay unit 0: 0.1s
1: 1s
2: 1min
Internal Event 2
Configuration 1
Operation type Same as Internal Event 1
Configuration 1. 0 0
Internal Event 2
Configuration 2
1st digit: Direct/
Reverse
2nd digit: Standby
3rd digit: EVENT state
at READY
4th digit: Undefined.
Same as Internal Event 1
Configuration 2. 0000 0
Internal Event 2
Configuration 3
1st digit: Controller
alarm OR
2nd digit: Special OFF
setup
3rd digit: Delay unit
4th digit: Undefined.
Same as Internal Event 1
Configuration 3. 0000 2
Internal Event 3
Configuration 1
Operation type Same as Internal Event 1
Configuration 1. 0 0
Internal Event 3
Configuration 2
1st digit: Direct/
Reverse
2nd digit: Standby
3rd digit: EVENT state
at READY
4th digit: Undefined.
Same as Internal Event 1
Configuration 2. 0000 0
Internal Event 3
Configuration 3
1st digit: Controller
alarm OR
2nd digit: Special OFF
setup
3rd digit: Delay unit
4th digit: Undefined.
Same as Internal Event 1
Configuration 3. 0000 2
Internal Event 4
Configuration 1
Operation type Same as Internal Event 1
Configuration 1. 0 0
Internal Event 4
Configuration 2
1st digit: Direct/
Reverse
2nd digit: Standby
3rd digit: EVENT state
at READY
4th digit: Undefined.
Same as Internal Event 1
Configuration 2. 0000 2