Nor-Cal SDC15 Controller - Manual (Page 138)

6-4
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
■ Event bank
Bank selection:
Display Item Contents Initial
value User
level Remarks
Internal Event 1
main setting 0 0 Necessary settings are
displayed according to
Internal Event 1 operation
type (E1.C1). -1999 to +9999
The decimal point position may vary
so that it meets the operation type of
the internal event.
The above value becomes 0 to 9999
in some operation types.
Internal Event 1
sub setting 0 0
Internal Event 1
Hysteresis 5 1 0 to 9999
The decimal point position may vary
so that it meets the operation type of
the internal event.
Internal Event 1
ON delay time 0 2 0.0 to 999.9
(Delay unit is 0.1s.)
0 to 9999
(Delay unit is other than 0.1s.)
Internal Event 1
OFF delay time 0 2
Internal Event 2
main setting 0 0 Necessary settings are
displayed according to
Internal Event 2 operation
type (E2.C1). Same as Internal Event 1.
Internal Event 2
sub setting 0 0
Internal Event 2
Hysteresis 5 1
Internal Event 2
ON delay time 0 2
Internal Event 2
OFF delay time 0 2
Internal Event 3
main setting 0 0 Necessary settings are
displayed according to
Internal Event 3 operation
type (E3.C1). Same as Internal Event 1.
Internal Event 3
sub setting 0 0
Internal Event 3
Hysteresis 5 1
Internal Event 3
ON delay time 0 2
Internal Event 3
OFF delay time 0 2
Internal Event 4
main setting 0 0 Necessary settings are
displayed according to
Internal Event 4 operation
type (E4.C1). Same as Internal Event 1.
Internal Event 4
sub setting 0 0
Internal Event 4
Hysteresis 5 1
Internal Event 4
ON delay time 0 2
Internal Event 5
OFF delay time 0 2
Internal Event 5
main setting 0 0 Necessary settings are
displayed according to
Internal Event 5 operation
type (E5.C1). Same as Internal Event 1.
Internal Event 5
sub setting 0 0
Internal Event 5
Hysteresis 5 1
Internal Event 5
ON delay time 0 2
Internal Event 5
OFF delay time 0 2