43 snmptrap mode, 43snmptrap mode – Pilz PSSnet SHL 8T MRP User Manual
Page 109
Advertising
CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
109
4.4.43 snmptrap mode
This command activates or deactivates an SNMP trap. Enabled trap receiv-
ers are active (able to receive traps). Disabled trap receivers are inactive (not
able to receive traps).
Format
snmptrap mode <
name> <ipaddr>
Mode
Global Config
U
no snmptrap mode
This command deactivates an SNMP trap. Disabled trap receivers are
inactive (not able to receive traps).
Format
no snmptrap mode <
name> <ipaddr>
Mode
Global Config
Advertising
This manual is related to the following products: