Pilz PSSnet SHL 8T MRP - Manual (Page 234)

234
4.9 LLDP - Link Layer Discovery Protocol
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.9.40 lldp tlv vlan-name
Configure the port's LLDP TLV inclusion of VLAN Name.
Format
lldp tlv vlan-name <{off|on}>
Mode
Interface Config
4.9.41 name
Set or remove a descriptive name for the current interface
(physical ports only).
Format
name <descriptive name>
Mode
Interface Config
<descriptive name>
Enter a descriptive name for the current interface (physical ports
only). Max. length is 20 characters.
Note: If it contains blanks or exclamation marks (!), enclose it in quo-
tation marks ("). The description itself must not contain any quotation
marks (' or "), question marks (?) or backslashes (\).
U no name
Delete the descriptive name for the current interface (physical ports
only).
Format
no name
Mode
Interface Config