Pilz PSSnet SHL 8T MRP - Manual (Page 164)

164
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.49 snmp trap link-status all
This command enables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled
(see “snmp-server enable traps linkmode” ).
Format
snmp trap link-status all
Mode
Global Config
U no snmp trap link-status all
This command disables link status traps for all interfaces.
Note: This command is valid only when the Link Up/Down Flag is enabled
(see “snmp-server enable traps linkmode”).
Format
no snmp trap link-status all
Mode
Global Config