Pilz PSSnet SHL 8T MRP - Manual (Page 132)

132
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.13 set igmp aging-time-unknown
This command configures the IGMP Snooping aging time for unknown
multicast frames (unit: seconds, min.: 3, max.: 3600, default: 260).
Format
set igmp aging-time-unknown <3-3600>
Mode
Global Config
4.6.14 set igmp automatic-mode
If enabled, this port is allowed to be set as static query port automatically, if
the LLDP protocol has found a switch or router connected to this port. Use
the command's normal form to enable the feature, the 'no' form to disable it.
Default
disabled (PSSnet SHL: enabled)
Format
set igmp automatic-mode
Mode
Interface Config