11 profinetio, 11profinetio 81 – Pilz PSSnet SHL 8T MRP User Manual
Page 81
Advertising
CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
81
4.4.11 profinetio
This command controls the PROFINET IO function on the switch.
Detailed information you can find in the User Manual Industrial Protocols.
Default
depends on the order code (standard = disable)
Format
profinetio admin-state {enable | disable}
Mode
Global Config
Admin-state
disable Disables the PROFINET IO function on this device.
Note: the relevant MIB objects are still accessible.
enable Enables the PROFINET IO function on this device.
Advertising
This manual is related to the following products: