Pilz PSSnet SHL 8T MRP - Manual (Page 180)

180
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.69 vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces. For VLAN
Only mode, untagged frames or priority frames received on this interface are
discarded. For Admit All mode, untagged frames or priority frames received
on this interface are accepted and assigned the value of the interface VLAN
ID for this port. With either option, VLAN tagged frames are forwarded in ac-
cordance with the IEEE 802.1Q VLAN Specification.
Default
Admit All
Format
vlan port acceptframe all <vlanonly | all>
Mode
Global Config
U no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to
Admit All. For Admit All mode, untagged frames or priority frames
received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames
are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
no vlan port acceptframe all
Mode
Global Config