20 spanning-tree mst vlan, 20spanning-tree mst vlan – Pilz PSSnet SHL 8T MRP User Manual
Page 278
CLI Commands: Switching
278
5.1 Spanning Tree Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1.20 spanning-tree mst vlan
This command adds an association between a multiple spanning tree
instance and a VLAN. The VLAN will no longer be associated with the
common and internal spanning tree. The instance <mstid> is a number
that corresponds to the desired existing multiple spanning tree instance.
The <vlanid> corresponds to an existing VLAN ID (1-4042).
This command accepts the value 0 for the mstid.
Format
spanning-tree mst vlan <mstid> <vlanid>
Mode
Global Config
U
no spanning-tree mst vlan
This command removes an association between a multiple spanning tree
instance and a VLAN. The VLAN will again be associated with the com-
mon and internal spanning tree. The instance <mstid> is a number that
corresponds to the desired existing multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
This command accepts the value 0 for the mstid.
Format
no spanning-tree mst vlan <mstid> <vlanid>
Mode
Global Config