Pilz PSSnet SHL 8T MRP - Manual (Page 272)

CLI Commands: Switching
272
5.1 Spanning Tree Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1.15 spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common
and internal spanning tree. The hellotime <value> is in whole seconds within
a range of 1 to 2 with the value being less than or equal to
"(Bridge Max Age / 2) - 1".
Default
2
Format
spanning-tree hello-time <1-2>
Mode
Interface Config
Global Config
U no spanning-tree hello-time
This command sets the Hello Time parameter for the common and
internal spanning tree to the default value, i.e. 2.
Format
no spanning-tree hello-time
Mode
Interface Config
Global Config