Pilz PSSnet SHL 8T MRP - Manual (Page 147)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
147
4.6.32 show mac-filter-table multicast
This command displays the Multicast Forwarding Database (MFDB) informa-
tion. If the command is entered with no parameter, the entire table is dis-
played. This is the same as entering the optional all parameter. The user
can display the table entry for one MAC Address by specifying the MAC ad-
dress as an optional parameter.
Format
show mac-filter-table multicast <macaddr | all>
Mode
Privileged EXEC and User EXEC
Mac Address
A multicast MAC address for which the switch has forwarding and or
filtering information. The format is two-digit hexadecimal numbers that
are separated by colons, for example 01:23:45:67:89:AB.
Type
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the table as
a result of a learning process or protocol.
Component
The component that is responsible for this entry in the Multicast For-
warding Database. Possible values are IGMP Snooping and Static
Filtering.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and fil-
tering (Flt:).
Forwarding Interfaces
The resultant forwarding list is derived from combining all the compo-
nent’s forwarding interfaces and removing the interfaces that are
listed as the static filtering interfaces.