Pilz PSSnet SHL 8T MRP - Manual (Page 224)

224
4.9 LLDP - Link Layer Discovery Protocol
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.9.15 lldp config chassis notification-interval
Configure the LLDP minimum notification interval (the minimum time after a
notification trap has been sent until a new trap can be sent, unit: seconds,
min.: 5 sec., max.: 3600 sec., default: 5 sec.).
Format
lldp config chassis notification-interval
<notification interval>
Mode
Global Config
Notification interval
Configure the LLDP minimum notification interval (the minimum time
after a notification trap has been sent until a new trap can be sent,
unit: seconds, min.: 5 sec., max.: 3600 sec., default: 5 sec.).
4.9.16 lldp config chassis re-init-delay
Configure the LLDP re-initialization delay (unit: seconds, min.: 1 sec., max.:
10 sec., default: 2 sec.).
Format
lldp config chassis re-init-delay <re-init delay>
Mode
Global Config
Re-init-delay
Configure the LLDP re-initialization delay (unit:seconds, min.: 1 sec.,
max.: 10 sec., default: 2 sec.).