5 logging host – Pilz PSSnet SHL 8T MRP User Manual
Page 117
CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.5 Syslog Commands
117
4.5.5 logging host
This command enables logging to a host where up to eight hosts can be
configured.
Default
Port - 514; Level - Critical;
Format
logging host <hostaddress>
[<port> [<severitylevel>]]
Mode
Global Config
Severity number
Severity name
Meaning
0
emergency
Minimum severity to be logged is 0. This is the
highest level and will result in all other messages of
lower levels not being logged.
1
alert
Minimum severity to be logged is 1.
2
critical
Minimum severity to be logged is 2.
3
error
Minimum severity to be logged is 3.
4
warning
Minimum severity to be logged is 4.
5
notice
Minimum severity to be logged is 5.
6
info
Minimum severity to be logged is 6.
7
debug
Minimum severity to be logged is 7. This is the lowest
level and will result in messages of all levels being
logged.
Tab. 15: Possible severity levels