Pilz PSSnet SHL 8T MRP - Manual (Page 171)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
171
4.6.60 storm-control flowcontrol per port
This command enables 802.3x flow control for the port.
Note: This command only applies to full-duplex mode ports.
Default
enabled
Format
storm-control flowcontrol
Mode
Interface Config
U no storm-control flowcontrol per port
This command disables 802.3x flow control for the port.
Note: This command only applies to full-duplex mode ports.
Format
no storm-control flowcontrol
Mode
Interface Config