53 storm-control egress-limiting, 54 storm-control ingress-limiting, 55 storm-control broadcast (port-related) – Pilz PSSnet SHL 8T MRP User Manual
Page 168: 53storm-control egress-limiting, 54storm-control ingress-limiting, 55storm-control broadcast (port-related)
168
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.53 storm-control egress-limiting
This command enables or disables the egress limiter globally for all frame
types.
Format
storm-control egress-limiting {disable | enable}
Mode
Global Config
4.6.54 storm-control ingress-limiting
This command enables or disables the ingress limiter globally.
Format
storm-control ingress-limiting {disable | enable}
Mode
Global Config
4.6.55 storm-control broadcast (port-related)
This command enables the broadcast limiter per port.
Enter the maximum number of broadcasts that the given port is allowed to
send (unit: frames per second, min.: 0 (no limit), default: 0 (no limit)).
Format
storm-control broadcast <max. broadcast rate>
Mode
Interface Config