Pilz PSSnet SHL 8T MRP - Manual (Page 67)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.3 Class of Service (CoS) Commands
67
4.3.1 classofservice dot1p-mapping
This command maps an 802.1p priority to an internal traffic class for a device
when in ‘Global Config’ mode. The number of available traffic classes may
vary with the platform. Userpriority and trafficclass can both be the range
from 0-7. The command is only available on platforms that support priority to
traffic class mapping on a ‘per-port’ basis, and the number of available traffic
classes may vary with the platform.
Format
classofservice dot1p-mapping <userpriority> <traf-
ficclass>
Mode
Global Config or Interface Config
U no classofservice dot1p-mapping
This command restores the default mapping of the 802.1p priority to an
internal traffic class.
Format
no classofservice dot1p-mapping
Modes
Global Config or Interface Config