Pilz PSSnet SHL 8T MRP - Manual (Page 241)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.10 SNTP - Simple Network Time Protocol
241
4.10.11sntp anycast vlan
Set the SNTP server's Anycast VLAN ID used for sending Anycast
messages, default: 1.
Format
sntp anycast vlan <1-4042>
Mode
Global Config
4.10.12sntp client accept-broadcast
Enable/Disable that the SNTP Client accepts SNTP broadcasts.
Format
sntp client accept-broadcast <on | off>
Mode
Global Config
U no sntp accept-broadcast
Disable the SNTP Client accepts SNTP broadcasts.
Format
no sntp client accept-broadcast
Mode
Global Config