Pilz PSSnet SHL 8T MRP - Manual (Page 68)

CLI Commands: Base
68
4.3 Class of Service (CoS) Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.3.2 classofservice ip-dscp-mapping
This command maps an IP DSCP value to an internal traffic class.
The <ipdscp> value is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21,
af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5,
cs6, cs7, ef.
Format
classofservice ip-dscp-mapping <ipdscp> <traf-
ficclass>
Mode
Global Config
U no classofservice ip-dscp-mapping
This command restores the default mapping of the IP DSCP value to an
internal traffic class.
Format
no classofservice dot1p-mapping
Modes
Global Config