Pilz PSSnet SHL 8T MRP - Manual (Page 293)

CLI Commands: Switching
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.3 HIPER-Ring
293
5.3.6 hiper-ring port secondary
Enter the switch's secondary HIPER Ring port.
Default
n/a not set
Format
hiper-ring port primary (<slot/port>)
Mode
Global Config
5.3.7 hiper-ring recovery-delay
Defines the maximum recovery delay of ring recovery in the HIPER Ring
(500 or 300 ms).
Default
n/a not set
Format
hiper-ring recovery-delay (<500/300>)
Mode
Global Config