Pilz PSSnet SHL 8T MRP - Manual (Page 60)

CLI Commands: Base
60
4.1 System Information and Statistics Com-
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Signal contact manual setting
closed The signal contact´s manual setting is closed.
open The signal contact´s manual setting is open.
Signal contact operating state
closed The signal contact is currently closed.
open The signal contact is currently open.
Signal contact trap
enabled A trap is sent if the signal contact state changes.
disabled No trap is sent if the signal contact state changes.
Note: To show the signal contact´s port related settings, use the command
show port {<slot/port> | all} (see
“show port” on page 152 ).
4.1.19 show slot
This command is used to display information about slot(s).
For [slot] enter the slot ID.
Format
show slot [slot]
Mode
Privileged EXEC