Pilz PSSnet SHL 8T MRP - Manual (Page 236)

236
4.10 SNTP - Simple Network Time Protocol
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
transmit-interval
Show the SNTP Server's interval for sending Anycast messages
(unit: seconds).
vlan
Show the SNTP server's Anycast VLAN ID (used for sending Anycast
messages).
4.10.3 show sntp client
This command shows all SNTP anycast configuration settings.
Format
show sntp client
Mode
Privileged EXEC and User EXEC
accept-broadcast
Show if the SNTP Client accepts SNTP broadcasts.
disable-after-sync
Show if the SNTP client will be disabled once it is synchronized to the
time server.
offset
Show the local time's offset (in minutes) with respect to UTC (positive
values for locations east of Greenwich).
request-interval
Show the SNTP Client's request interval (unit: seconds).
server
Show the SNTP Client's server IP addresses.
server primary
Show the SNTP Client's primary server IP addresses.