Pilz PSSnet SHL 8T MRP - Manual (Page 69)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.3 Class of Service (CoS) Commands
69
4.3.3 classofservice trust
This command sets the class of service trust mode of an interface. The mode
can be set to trust one of the Dot1p (802.1p) or IP DSCP packet markings.
Note: In trust ip-dscp mode the switch modifies the vlan priority for out-
going frames according to
– the a fix mapping table
(see Reference Manual ”Web-based Management” for further details).
Format
classofservice trust dot1p | <ip-dscp>
Mode
Global Config or
U no classofservice trust
This command sets the interface mode to untrusted, i.e. the packet prior-
ity marking is ignored and the default port priority is used instead.
Format
no classofservice trust
Modes
Global Config or