Pilz PSSnet SHL 8T MRP User Manual
Page 54
CLI Commands: Base
54
4.1 System Information and Statistics Com-
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Protocol Statistics
BPDU's received - The count of BPDU's (Bridge Protocol Data Units)
received in the spanning tree layer.
BPDU's Transmitted - The count of BPDU's (Bridge Protocol Data
Units) transmitted from the spanning tree layer.
802.3x Pause Frames Received - A count of MAC Control frames
received on this interface with an opcode indicating the PAUSE oper-
ation. This counter does not increment when the interface is operating
in half-duplex mode.
GVRP PDU's Received - The count of GVRP PDU's received in the
GARP layer.
STP BPDUs Transmitted - Spanning Tree Protocol Bridge Protocol
Data Units sent
STP BPDUs Received - Spanning Tree Protocol Bridge Protocol
Data Units received
RST BPDUs Transmitted - Rapid Spanning Tree Protocol Bridge
Protocol Data Units sent
RSTP BPDUs Received - Rapid Spanning Tree Protocol Bridge Pro-
tocol Data Units received
MSTP BPDUs Transmitted - Multiple Spanning Tree Protocol Bridge
Protocol Data Units sent
MSTP BPDUs Received - Multiple Spanning Tree Protocol Bridge
Protocol Data Units received
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and seconds since the
statistics for this port were last cleared.
The display parameters, when the argument is ‘switchport, are as follows :
Octets Received - The total number of octets of data received by the
processor (excluding framing bits but including FCS octets).
Total Packets Received Without Error- The total number of packets
(including broadcast packets and multicast packets) received by the
processor.
Unicast Packets Received - The number of subnetwork-unicast
packets delivered to a higher-layer protocol.
Multicast Packets Received - The total number of packets received
that were directed to a multicast address. Note that this number does
not include packets directed to the broadcast address.