Pilz PSSnet SHL 8T MRP - Manual (Page 144)

144
4.6 Device Configuration Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6.30 s how igmpsnooping
This command displays IGMP Snooping information. Configured information
is displayed whether or not IGMP Snooping is enabled. Status information is
only displayed when IGMP Snooping is enabled.
Format
show igmpsnooping
Mode
Privileged EXEC and User EXEC
Admin Mode
This indicates whether or not IGMP Snooping is globally enabled on
the switch.
Forwarding of Unknown Frames
This displays if and how unknown multicasts are forwarded.
The setting can be Discard, Flood or Query Ports.
The default is Query Ports.
Group Membership Interval
This displays the IGMP Group Membership Interval. This is the
amount of time a switch will wait for a report for a particular group on
a particular interface before it sends a query on that interface. This
value may be configured.
Multicast Control Frame Count
This displays the number of multicast control frames that are
processed by the CPU.
Interfaces Enabled for IGMP Snooping
This is the list of interfaces on which IGMP Snooping is enabled.
Additionally, if a port has a special function, it will be shown to the
right of its slot/port number. There are 3 special functions:
Forward All, Static Query Port and Learned Query Port.
Querier Status (the administrative state).
This displays the IGMP Snooping Querier's administrative status.
Querier Mode (the actual state, read only)
This displays the IGMP Snooping Querier's operating status.