Pilz PSSnet SHL 8T MRP - Manual (Page 93)

CLI Commands: Base
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4 Management Commands
93
4.4.25 snmp-access version
This command configures the SNMP version specific access mode for
SNMPv1 and SNMPv2.
Format
snmp-access version {all|v1|v2} {disable|enable}
Mode
Global Config
all
Enable or disable SNMP access by all protocol versions (v1 and v2).
v1
Enable or disable SNMP access by v1.
v2
Enable or disable SNMP access by v2.
Note: The SNMPv3 is always allowed and can only be disabled or restricted
by the global command (snmp-access global ...).