Pilz PSSnet SHL 8T MRP - Manual (Page 86)

CLI Commands: Base
86
4.4 Management Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.4.18 show snmp-access
This command displays SNMP access information related to global and
SNMP version settings. SNMPv3 is always enabled.
Format
show snmp-access
Mode
Privileged EXEC and User EXEC
4.4.19 show snmpcommunity
This command displays SNMP community information. Six communities are
supported. You can add, change, or delete communities. The switch does
not have to be reset for changes to take effect.
The SNMP agent of the switch complies with SNMP Version 1 (for more
about the SNMP specification, see the SNMP RFCs). The SNMP agent
sends traps through TCP/IP to an external SNMP manager based on the
SNMP configuration (the trap receiver and other SNMP community
parameters).
Format
show snmpcommunity
Mode
Privileged EXEC
SNMP Community Name
The community string to which this entry grants access. A valid entry
is a case-sensitive alphanumeric string of up to 32 characters. Each
row of this table must contain a unique community name.
Client IP Address -
An IP address (or portion thereof) from which this device will accept
SNMP packets with the associated community. The requesting
entity's IP address is ANDed with the Subnet Mask before being com-
pared to the IP Address. Note: that if the Subnet Mask is set to