Pilz PSSnet SHL 8T MRP - Manual (Page 157)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
157
VLAN Name
A string associated with this VLAN as a convenience. It can be up to
32 alphanumeric characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of `Default`. This field is
optional.
VLAN Type
Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that
is configured and permanently defined), or Dynamic (one that is cre-
ated by GVRP registration).
Slot/Port
Valid slot and port number separated by forward slashes. It is possi-
ble to set the parameters for all ports by using the selectors on the top
line.
Current
Determines the degree of participation of this port in this VLAN. The
permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equiv-
alent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is equivalent
to registration normal in the IEEE 802.1Q standard.
Configured
Determines the configured degree of participation of this port in this
VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equiv-
alent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is equivalent
to registration normal in the IEEE 802.1Q standard.
Tagging
Select the tagging behavior for this port in this VLAN.