Pilz PSSnet SHL 8T MRP - Manual (Page 274)

CLI Commands: Switching
274
5.1 Spanning Tree Commands
PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
5.1.17 spanning-tree max-hops
This command sets the Bridge Max Hops parameter to a new value for the
common and internal spanning tree. The max-hops value is an integer within
a range of 1 to127.
Format
spanning-tree max-hops <1-127>
Mode
Global Config
U no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and
internal spanning tree to the default value, i.e. 20.
Format
no spanning-tree max-age
Mode
Global Config