Pilz PSSnet SHL 8T MRP - Manual (Page 183)

PSSnet SHL - Command Line Interface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
4.6 Device Configuration Commands
183
4.6.72 vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to
enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tag-
ging is disabled, traffic is transmitted as untagged frames. The ID is a valid
VLAN identification number.
Format
vlan port tagging all < 1-4042>
Mode
Global Config
U no vlan port tagging all
This command configures the tagging behavior for all interfaces in a
VLAN to disabled. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
no vlan port tagging all < 1-4042>
Mode
Global Config