Adept s650HS Quattro - Manual (Page 24)

Chapter 1: Introduction
Task to be Performed Reference Location
the robot and the facility AC power source. Robot on page 79.
Install user-supplied safety barriers in the workcell. Installing User-Supplied Safety
Equipment on page 84.
Connect digital I/O through the robot XIO connector. Using Digital I/O on Robot XIO
Connector on page 89.
Start the system, including system start-up and
testing operation. Starting the System for the First Time
on page 96.
Install optional equipment, including end-effectors,
user air and electrical lines, external equipment, etc. End-Effectors on page 105.
1.8 Manufacturer’s Declaration
The Manufacturer’s Declaration of Incorporation and Conformity for Adept robot systems can
be found on the Adept website, in the Download Center of the Support section.
http://www.adept.com/support/downloads/file-search
NOTE: The Download Center requires that you are logged in for access. If you are
not logged in, you will be redirected to the Adept website Login page, and then
automatically returned to the Download Center when you have completed the login
process.
1. From the Download Types drop-down list, select Manufacturer Declarations.
2. From the Product drop-down list, select Adept Quattro Robots category.
3. Click Begin Search. The list of available documents is shown in the Search Results area,
which opens at the bottom of the page. You may need to scroll down to see it.
4. Use the Description column to locate the document for the language you want, and then
click the corresponding Download ID number to access the Download Details page.
5. On the Download Details page, click Download to open or save the file.
Adept Quattro User's Guide, Rev F
Page 24 of 196