Comtech EF Data NetVue Release 1.1 User Guide - Manual (Page 120)

Alerter Revision 3
NetVue User Guide MN-NETVUE
6–7
4. The Add Connection window opens.
a. Enter the Name of DMS. This is a name you create for the NetVue System.
b. Enter the Host name or IP address of the NetVue Agent to be connected.
Figure 6-11 Add Connection window
5. If the default connection settings need to be changed, click the Advanced button to open the
Connection Settings window.
6. Make the necessary Connection Settings changes.
Figure 6-12 Connection Settings window
7. Click OK.
8. When prompted, select Yes to apply the changes and reconnect to the new NetVue System.