Comtech EF Data NetVue Release 1.1 User Guide - Manual (Page 151)

Advanced Configuration (System Display) Revision 3
NetVue User Guide MN-NETVUE
10–14
• Have two different network connections
• Define four different heartbeats
10.4.1.4.1 Two network connections
Make sure the two NetVue Servers have two network cards each. Each server must be connected to two
different networks.
Make sure to follow the correct order of the connections in the Network Connections list.
Order in list of Network Connections:
1. Used for ...
2. First connection in the list (e.g., Corporate LAN)
3. Heartbeats
4. Second connection in the list (e.g., Acquisition LAN)
5. Data synchronization
10.4.1.4.2 Four heartbeats
Configure four different heartbeats. See Table 8-2.
Heartbeat Type From Towards
1 Standard DMA 1 (NetVue Server 1) DMA 2 (NetVue Server 2)
2 Standard DMA 2 (NetVue Server 2) DMA 1 (NetVue Server 1)
3 Inverted DMA 1 (NetVue Server 1) Example: Domain Controller or a local switch
4 Inverted DMA 2 (NetVue Server 2) Example: Domain Controller or a local switch
Table 8-2 Heartbeat Configurations
10.5 User Management
NetVue Cluster has a standard, fully integrated security module. Use it to:
• Deny access to various parts of the system for unauthorized users
• Allow easy access to the NetVue cluster for authorized users
• Manage users through user profiles
• Control access to parts of the system
• Control action permissions
• Keep a detailed log of all user activity
10.5.1 CEFD convention of Security Layers
There are several layers below the CEFD Administrator of Security: