Comtech EF Data NetVue Release 1.1 User Guide - Manual (Page 195)

Advanced Configuration (System Display) Revision 3
NetVue User Guide MN-NETVUE
10–58
To send the email notifications in HTML format, do not select this check box.
6. Click OK.
10.8.1.3 Configuring a work force schedule
1. In System Display, go to the top menu and choose Advanced | Notifications.
2.
Right-click a user or a user group, and click Edit Schedule.
IMPORTANT
If you do not have the Notifications: Edit notifications of another user permission, you
can only edit your own notifications.
3. Select a user from the list. Each listed user can have a separate schedule.
4. Select Enable Work Force Scheduler.
IMPORTANT
If you clear this option, NetVue will not check this schedule before sending notifications
to the selected user. Instead, NetVue sends notifications to that user any time.
5. Click a cell on the roster, or left-click and drag to select a group of cells.
NOTE: A cell represents a one-hour time period.
6. Right-click one of the selected cells and select Active or Inactive.
• Click Active to permit NetVue to send notifications during this time period
• Or, click Inactive to prevent NetVue from sending notifications during this time period
On the roster, green time periods mean a user is Active, but white time periods mean a
user is Inactive.
4. Click OK.
10.8.2 Notification layout
10.8.2.1 Customizing the layout of notification messages
All notification messages have a standard layout as the default. However, you can design custom
notification message templates for each NetVue, if desired.
Custom notification templates are not synchronized across the NetVue cluster. Each NetVue that uses
custom notification templates must have its own set of templates saved in an XML file on that NetVue.