Overview, Parts and descriptions, 10 vcc-x controller technical guide – Orion System VCC-X Controller User Manual

Page 10

Advertising
background image

OVERVIEW

10

VCC-X Controller Technical Guide

Parts and Descriptions

PART NO.

PART DESCRIPTION

ILLUSTRATION

PAGE NO.

EBC-1-F

EBC-1.5-F

EBC-3-F

EBC-10-F

EBC-25-F

EBC-37-F

EBC-50-F

EBC-75-F

EBC-100-F

EBC-150-F

EBC-250-F

EBC-SPOOL

EBC E-BUS Cables

The EBC E-BUS Expansion Cables attach to the VCC-X Controller,
VCC-X Expansion Modules, and E-BUS Sensors. The EBC E-BUS cables
can be crimped and clamped to the E-BUS connector. Different lengths
can be joined together using an E-BUS extension adapter. The EBC
E-BUS Cables are available in 1, 1.5, 3, 10, 25, 37, 50, 75, 100, 150, 250
& 1000 feet lengths. Includes: EBC E-BUS Cable Assembly.

N/A

OE250

Outdoor Air Temperature Sensor

Used for temperature sensing applications. Includes: 10k Ohm Outside Air
Temperature Sensor, 2 wire, mounted in a weatherproof handy box only.

Page 30

OE271

Duct Static Pressure Sensor

Used for duct static pressure sensing applications. Includes: 0-5″ W.C.,
0-5 VDC, Static Pressure Sensor only.

Page 33

OE258-01

Building Static Pressure Sensor

Used for Building Pressure Sensing. Includes: -0.25 to +0.25″ W.C., 0-5
VDC, 24 VAC/VDC supply power Building Pressure Sensor only.

Page 28

OE290

Static Pressure Pick-up Tube

Used with OE271 Static Pressure Sensor for static pressure sensing ap-
plications. Includes: Static Pressure Pick-up Tube with 1 ft. length of FRP
tubing, gasketed mounting bracket, and screws.

Page 33

OE230

OE231

Duct Temperature Sensor - 6” Probe

Duct Temperature Sensor - 12" Probe

OE230 = 6″ probe length. OE231 = 12″ probe length. Used for return or
supply air temperature sensing applications. Includes: 10k Ohm Duct
Temperature Sensor, 2 wire only.

Pages
26 & 27

OE392-

10-VCCX

(Future)

System Manager Touch Screen II (In Development)

The System Manager TS II provides a direct, graphic-enhanced, menu-
driven link to enable the system operator to view the status and adjust the
setpoints of any controller on the VCC-X control system. The System Man-
ager TS is equipped with a 4.3” 480 x 272 WQVGA RGB TFT LCD Touch
Screen Display. The System Manager TS is furnished with hardware for
fl ush mounting into hollow drywall or surface mounting on concrete brick
or plaster surfaces. Includes: System Manager TS with 12 ft. long pigtail
cable assembly.

See System
Manager
Touch
Screen II
Technical
Guide

OE391-12

Modular Service Tool SD

Includes: Modular Service Tool, power supply, communication cables,
4 Gigabyte SD card, and (4) AA batteries. Used to program and monitor
all Orion controllers.

Mode

Selection

6

5

4

7

0

8

1

3

2

9

-

See VCC-X
Controller
Operator
Interfaces
SD
Technical
Guide

Advertising
This manual is related to the following products: