Orion System VCC-X Controller - Manual (Page 9)

OVERVIEW
9 VCC-X Controller Technical Guide
Parts and Descriptions
PART NO. PART DESCRIPTION ILLUSTRATION PAGE NO.
OE217-04 E-BUS Digital Room Sensor - Temp and Humidity
The OE217-04 is used with the VCC-X Controller for room air temperature
and humidity sensing applications. Contains no LCD Display or keypad.
Uses EBC E-BUS cable.
Page 22
OE256-05 E-BUS CO
2
Wall-Mounted Sensor
Used with the VCC-X for CO
2
sensing applications where wall mounting
in the space is desired. Connects to the VCC-X Controller with an EBC
E-BUS cable of required length. Cable sold separately.
Page 23
OE256-07 E-BUS CO
2
Duct Sensor with Remote Pickup Tube
Used with the VCC-X Controller for duct mounted CO
2
sensing applica-
tions. Connects to the VCC-X Controller with an EBC E-BUS cable of
required length. Includes: Duct Mounted CO
2
Sensor, Integral Aspiration
Box, Airfl ow Pickup Tube and 10 ft. EBC Cable. Page 24
OE265-15-A E-BUS Horizontal Outdoor Air Temperature & Humidity
Sensor
Used for outdoor temperature and humidity sensing applications. Con-
nects to VCC-X Controller or E-BUS Adapter Hub using EBC E-BUS
cable. Includes: 10k Ohm E-BUS Horizontal Outside Air Temperature &
Humidity Sensor, mounted in a weatherproof handy box with attached 3
foot EBC E-BUS Cable with jack. A 10 foot EBC cable is included to
connect to the VCC-X Controller. If a longer EBC cable is required, it must
be ordered separately.
Page 31
OE265-16-A E-BUS Vertical Outdoor Air Temperature & Humidity Sensor
Used for outdoor temperature and humidity sensing applications. Con-
nects to VCC-X Controller or E-BUS Adapter Hub using EBC E-BUS
cable. Includes: 10k Ohm E-BUS Vertical Outside Air Temperature & Hu-
midity Sensor, mounted in a weatherproof handy box with attached 3 foot
EBC E-BUS Cable with jack. A 10 foot EBC cable is included to
connect to the VCC-X Controller. If a longer EBC cable is required, it must
be ordered separately.
Page 31
OE265-17-A E-BUS Return Air Temperature & Humidity Sensor
Used for return air temperature and humidity sensing applications. Con-
nects to VCC-X Controller or E-BUS Adapter Hub using EBC E-BUS
cable. Includes: 10k Ohm E-BUS Return Air Temperature & Humidity Sen-
sor, mounted in a weatherproof handy box attached 3 foot EBC E-BUS
Cable with jack. A 50 foot EBC cable is included to connect to the VCC-X
Controller. If a longer EBC cable is required, it must be ordered separately.
Page 32
OE275-01 Suction Pressure Transducer
Used for suction pressure sensing applications. Connects to the RSMV.
Includes: OE275-01 Suction Pressure Transducer and modular cable with
a modular connector on one end and bare stripped wires on the other end.
Page 38
37X04 1.2 1.6 <PC>
4 3 2 1 3M
37X04 1.2 1.6
<PC> 4 3 2 1 3M
43 2 1 3M
37X04 1.2 1.6
<PC> 4 3 2 1 3M