Orion System VCC-X Controller - Manual (Page 24)

Zone
Zone
VCC-X CONTROLLER WIRING
VCC-X Controller Technical Guide 24
Duct Mounted E-BUS CO
2
Sensor
The OE256-07 Duct Mounted E-BUS CO
2
Sensor with Remote
Pickup Tube is used for sensing the current CO
2
level in the HVAC
unit’s return air stream. This is useful when you want an average
CO
2
reading in the area served by the HVAC unit or when you don’t
want a wall mounted E-BUS CO
2
Sensor due to sensor tampering
concerns in the space.
The OE256-07 Duct Mounted Return Air CO
2
Sensor is comprised
of the CO
2
Sensor, the WattMaster Aspiration Box Assembly, and a
Remote Pickup Tube.
The Duct Mounted Return Air E-BUS CO
2
Sensor with Remote
Pickup Tube is designed to be mounted in the return air duct of the
HVAC unit and uses its integral aspiration box to sample the CO
2
level in the duct. See Figure 10 below for wiring and installation
details.
NOTE: If using multiple E-BUS Sensors or Modules, the
E-BUS Hub or Adapter Board may be required.
Figure 10: OE256-07 - Duct Mounted E-BUS CO
2
Sensor Wiring
Duct Mounted E-BUS CO
2
Sensor
OE256-07 Duct Mounted
E-BUS CO Sensor
2
Note:
1.) The Duct Mounted E-BUS CO Sensor
Connects To The
Controller Using An
EBC E-BUS Cable Of The Required Length
Or The Provided 10 Foot EBC Cable.
2
VCC-X
VCC-X Controller
10 Foot EBC
E-BUS Cable
(Provided)
EBC E-BUS
Cable
with Jack
Connection
37X04 1.2
1.6 <PC>
4 3 2 1 3M