Verilink 8100A (34-00237) Product Manual - Manual (Page 188)

5-4 8 0 0 0 S e r i e s
Network Statistics Reports
The Network Statistics menu contains commands to display statistical
information about the packets handled by the IP routing engine and
information regarding higher level services, and to clear network statistics for
specific protocols.
Sa7 Bit set | cleared
Sa8 Bit set | cleared
Rcv Clk Source Internal | External
RIP enabled | disabled
Poisoned Reverse enabled | disabled
Dynamic Host Configuration
Protocol (DHCP) Client enabled | disabled
Bridging enabled | disabled
Spanning Tree enabled | disabled
Port Priority 0-255 (default = 128)
Path Cost 1-65,535 (default = 32,768)
PPP Auth Type (WAN port) None | PAP Client | PAP Server | CHAP Client |
CHAP Server
Userid PAP User ID
Password PPP password
Peer Name PPP peer name
DLCI—Frame Relay Only RAW (No Encapsulation) | Proprietary Voice
DLCI | RFC 1490 | ATM RFC 1483 (Tunneling)
VPI/VCI—ATM Only AAL5 (None) | AAL0 (None) | Proprietary Voice
| RFC 1483 (using VC Muxing) | RFC 1483 (with
LLC Encapsulation) | RFC 2364 (PPPoATM with
LLC Encapsulation) | RFC 2364 (PPPoATM
using VC Muxing) | AAL1/CES | AAL2/LES
MTU maximum transmission unit per port
TCP MSS Adjust Transmission Control Protocol
Maximum Segment Size Adjustment
IP Interfaces on Port #
ID host ID
IPAddr IP Addresses for the ID (maximum = 8)
IPMask no. of bits reserved for host ID (max. 8)
Priority NORMAL | HIGH
Ethernet address Ethernet address (Ethernet)
Full duplex Enabled | Disabled (Ethernet)
Parameter Description